Our Conical Blenders incorporated with a conical vessel accompanying a double start helix ribbon mounted on a central shaft are superiorly used for mixing, homogenizing and granulation applications. Developed from carbon steel, special alloys, and stainless steel, the blenders are suitable for mixing bulk powder volumes, dry & moist powders, slurries and wet cakes. Our blenders can be operated at variable ribbon speeds to adjust mixing time according to the requirement. The blenders have bottom fully open, which assists in discharging the product quickly.
Excellent eradication of product contamination
Can blend gently with low shear forces
Equipped with ribbon agitator for center discharge
Developed specifically for atmospheric operation
Variable or single speed drive
Horse power to suit higher density material
Spray nozzles for liquid introduction
Continuous ribbon agitator for end discharge and interrupted ribbon for high-density materials
For heating and cooling, the blender is provided with simple, dimpled and baffled jackets
We have a quality collection of Industrial Blenders, which is idyllically utilized for mixing a lot of solids, granules, and powder homogeneously. These blenders are sturdily designated from the optimum quality raw materials and advanced techniques to make sure even blending of the materials by moving them in distinguished ways. Our product range is extensively renowned for its unique attributes including precise material mixing, dust proof construction, special shaft sealing, flame protected motor, quick material mixing and easy cleaning. The blenders are ideally used for blending products like fire retardants, resins, dyes, pharmaceuticals, chemicals, food, adhesives and milk powder.
The Ribbon Blenders offered by us are technologically designed to make them useable with dry materials, nevertheless liquid and gas stream can be added. These blenders are developed by using optimum grade stainless steel, carbon steel and alloys along with the incorporation of transmission parts, U-shaped cylinder and double ribbon agitators. In this processing of blending the material by rotation, the outer ribbon pushes the materials from both ends to the center and at the same time, the inner ribbon pushes material from center to both ends. The blending machines have ribbon wind with divergent angles that allow the materials to be carried out in different directions. With the continuous convective circulation, the materials get sheared and mixed thoroughly and rapidly.
Dust proof design
Product temperature can be measured
Equipped with agitator for center discharge
Manually operated or pneumatic operated flap valve
Equipped with worm reduction gearbox
Accomplished with single speed drive
Squirrel cage, three phase induction motors idyllic for 415 volts, 50 HZ
Working capacity ranges between 5 liters and 30000 liters