Rising Film Evaporators
Approx. Rs 50 Lakh / Unit
- Material: Stainless Steel
- Voltage: 440V
- Automatic Grade: Automatic
- Brand: PMI
- Country of Origin: Made in India
- Water Evaporative Capacity(Lcg/Hr): 300 To 2000
- Steam Pressure(VIPA): 0..5 - 0.8
- Evaporating Temperature ( DegreeC): 45-90 Degree C
- Usage/Application: Industrial
We have a qualitative range of Rising Film Evaporators, which is idyllically utilized for the liquids containing high viscosity or fouling tendency. These evaporators are developed by making use of advanced grade material and sophisticated techniques incorporated with a long vertical tube that generates an ascensional flow improvising the heat transfer co-efficient.In this evaporator, the liquid feed enters from the bottom of steam heated tubes. Effective water evaporation from the liquid feed is imparted from the parallel movement of liquid and vapor along tube surfaces.
Features
- Equipped with suit for liquids attained high viscosity and fouling tendency
- Flexible to change into forced circulation type evaporator, if product requires
- Ideal for high-temperature applications
- Low fuel consumption
- High heat transfer coefficient
- Low residence time
- Suitable for effluent treatment
Applications
- Polymers
- Thermal desalination
- Pharmaceuticals
- Solvent recovery
- Food production
- Juice concentration
- Reboiler for distillation columns
Thin Film Evaporators
Approx. Rs 30 Lakh / onwards
- Automation Grade: Automatic
- Material: Stinless Steel
- Usage/Application: Industrial
- Frequency: 50-60Hz
- Brand: PMI
- Voltage: 440V
- Phase: 3 Phase
- Country of Origin: Made in India
- Evaporative Capacity(Kg/Lu): 300-1000
- Steam Pressure: 0.5-0.8
- Steam Consumption / Evaporative Capacity(With Heat Pressure Pump): 0.65
We have a qualitative collection of
Thin Film Evaporators, which is superlatively used for improvising the concentration of viscous and heat sensitive liquids. These evaporators are cautiously developed by employing most advanced techniques and premium grade raw materials to ensure a noticeable reduction in fouling and liquid residence time. The liquid material is fed into the evaporator from its top and uniformly distributed on vertical cylindrical heat transfer area by wiper blades. The solvent and water evaporation takes place precisely as the thin film gets down the heat transfer area.
Features
- Optimum heat conductivity and coefficient
- Superior evaporation
- Short residence time
- Adjustable product indexes
- Evaporation capacity goes up to 200 kg/m2 per hour with elevated thermal efficiency
Applications
- Antibiotics
- Fruit juices
- Solvent mix
- Gelatin
